The Indrion Link 100 is an intelligent 12V 100Ah LFP battery engineered to deliver safe, dependable and connected energy storage.
Combining long life, intelligent protection and digital service support, the Indrion Link 100 provides reliable power whenever it is needed.
| Parameter | Specification |
|---|---|
| Product Name | Indrion Link 100 |
| Battery Chemistry | Lithium Iron Phosphate (LFP/LiFePO₄) |
| Voltage Architecture | 12V class |
| Primary Applications | Home backup, solar storage, small businesses, security systems and telecom infrastructure |
| Installation Type | Standalone or parallel-connected battery system |
| Inverter Compatibility | Compatible with supported standard 12V inverters and UPS systems |
| Maintenance | Annual digital service recommended |
| Nominal Voltage | 12.8V |
| Nominal Capacity | 100Ah |
| Nominal Energy | 1.28kWh |
| Cell Configuration | 4 cells in series (4S) |
| Battery Operating Voltage Range | 11.6–14.4V |
| Product Dimensions | TBD after mechanical-design release |
| Product Weight | TBD after production build |
| Shipping Dimensions | TBD |
| Shipping Weight | TBD |
| Continuous Charge Current | 80A |
| Maximum Charge Current | 100A |
| Continuous Discharge Current | 100A |
| Peak Discharge Current | 145A |
| Self-Discharge Rate | 2% per month |
| Parallel Capability | Up to 8 compatible batteries |
| Series Connection | Not permitted unless specifically approved |
| Rated Cycle Life | 3000+ Cycles |
| Recommended Depth of Discharge | 80% DoD at C/3 at 25°C |
| End-of-Life Criterion | 80% SOH |
| Annual Digital Service | Battery health, diagnostic and performance review |
| Battery Management System | Intelligent in-house BMS architecture |
| Cell-Voltage Monitoring | Individual cell monitoring |
| Temperature Monitoring | Cell and power-switching-device temperature monitoring |
| Current Monitoring | Charge and discharge current monitoring |
| State-of-Charge Estimation | Supported |
| State-of-Health Estimation | Supported |
| Cell Balancing | Supported |
| Cell Overvoltage Protection | Supported |
| Cell Undervoltage Protection | Supported |
| Pack Overvoltage Protection | Supported |
| Pack Undervoltage Protection | Supported |
| Charge Overcurrent Protection | Supported |
| Discharge Overcurrent Protection | Supported |
| Short-Circuit Protection | Supported |
| High-Temperature Protection | Supported |
| Low-Temperature Protection | Supported |
| FET Temperature Protection | Supported |
| Temperature-Sensor Fault Detection | Supported |
| Reverse-Current Protection | Supported |
| Cell-Imbalance Detection | Supported |
| Communication-Fault Detection | Supported |
| Fail-Safe Operation | Supported |
| Fault Logging | Supported |
| Event Recording | Supported |
| Operational Temperature | 0°C to 50°C |
| High-Temperature Cut-Off | Above 55°C |
| Low-Temperature Cut-Off | Below 0°C |
| Survival Temperature | −10°C to +60°C |
| Service Interface | Wi-Fi or RS485 |
| External Wired Communication | RS485 with Modbus RTU |
| Wireless Communication | Wi-Fi |
| Network Communication | Ethernet or Wi-Fi, where supported |
| Service Communication | Ethernet or USB, where supported |
| Parallel Battery Communication | RS485 with Modbus RTU |
| Remote Monitoring | Supported through connected services |
| Digital Battery Health Check | Supported |
| Remote Diagnostics | Supported |